Shirting fails in ordinary ways: a collar that wilts, a stripe that grins after wash, a width that will not yield the marker, or a shade that drifts between the first and second dye lot. Those are selection problems. They are not proof that one weave is universally stronger, cooler, or more formal. The matrix keeps each use condition tied to a question and to the evidence that would make an answer meaningful. Outdoor membranes, upholstery abrasion, and industrial coatings are outside this page because they are outside the shirting scope.
| Use condition | Material question | Evidence context |
|---|---|---|
| Repeated contact | How does the face behave against skin, cuffs, and a daily press? | A handled swatch, plus any pilling or appearance method that matches the wear you care about. Smooth poplin and ribbed twill should not be scored with a furniture test. |
| Moisture | Are you asking about liquid sitting on the cloth, or about vapour leaving the shirt? | Those are separate methods. A hydrostatic figure, if anyone offers one, does not describe moisture vapour transmission, and neither number is assumed for this shirting range. |
| Dimensional change | What laundry cycle and what fusing or sewing tension will the cloth meet? | Quote the wash state and the reference length. A nominal shrinkage story without a method is not a tolerance. |
| Joining | How will the cloth be cut and seamed, and how much selvedge must be excluded? | Construction and usable width. A full-width quotation that includes unusable edge will distort the marker. |
| Colour | Which physical reference is being approved, a lab dip or a bulk shade band? | Date the sample, name the light, and keep the lot identity with the approval. Fastness to wash, light, and perspiration still need their own methods if they are in the brief. |
Results from different methods are not automatically comparable. A poplin washed once in a lab and a twill measured after a garment wash can share a fibre label and still be the wrong pair for a side-by-side conclusion. When the shirt program is warm-weather dress, say whether you are judging cool hand, opacity, or crease. When it is a heavier twill casual shirt, say whether the diagonal should stay visible after washing. Those sentences tell a reviewer which row of this matrix matters first.
A cotton poplin or cotton twill conversation usually starts with hand, moisture take-up, and how the shirt feels after a day against the skin. A synthetic-fibre conversation usually starts with tensile strength, drying, and the finishing route. Those are opposing selection priorities, not an environmental ranking, and neither side is a measured Thomas Mason result. Pick the property the shirt program needs, then name the test that would speak to it.
Hand and abrasion split the same way. A durability note needs the method and the end point on the specimen you hold. A comfort note needs that swatch in the hand, under the light used for approval. A pilling or abrasion figure does not replace the hand comment, and a furniture-scale abrasion method is the wrong instrument for a shirt face.
A stock question asks what can be identified now: the lot, the shade band already dyed, and whether a later roll belongs to that batch. A development question asks for a change that has not been made: a different yarn count, a different finish, or a lab dip that is still a proposal. The form does not set a minimum, reserve capacity, or name a date. It tells a reviewer which of the two paths the brief is on. Batch traceability stays a document request until a batch record is actually supplied.
Background: a shirt maker holds a plain white poplin swatch and a blue twill swatch and wants one of them discussed for a dress-shirt program. No completed trial is stated. Process: write the fibre shares so they add to 100%, name the weave, and record mass as g/m² only after the specimen is conditioned in the ISO 139 temperate atmosphere, 20°C and 65% relative humidity. Keep full width and usable width in separate cells, and say whether the colour reference is a lab dip or a shade band. Result: the audit ends as a shorter question, such as usable width after the selvedge or the shade band for that lot, not as a performance number. Tear strength and seam slippage stay empty until a method and a specimen state are attached.
Say whether the textile is discussed for indoor contact, outdoor exposure or a processing step. One setting per paragraph keeps the later question readable.
Name the behaviour under review, such as handle, moisture, dimensional change or joining. Different behaviours need different methods.
Include composition, construction, quantity and destination only as the context of the request. They do not confirm that a material has been approved for that use.
Care, colour approval, and cutting width make a shirting brief specific. Exposure language borrowed from rainwear does not.
Discuss your fabric requirements